Skip to content

Cart

Your cart is empty

Atelier · Research & Development

Tradition is something you keep improving.

Every ZULLO frame carries more than fifty years of Italian framebuilding, by the same hands. But we do not treat that heritage as a finished thing. At the ZULLO workshop in Castelnuovo del Garda, Roberto and the team are always drawing, testing, refining and riding the next idea — so that each frame we build is a little better than the one before it.

CAD sketch of a curved chainstay geometry

01 · Design

It begins with a line.

Every new idea starts on the screen. Roberto draws each element in CAD — a chainstay curve, a tube junction, the exact flow of a seat cluster — studying how the shape will carry load, clear a tyre and look on a finished bicycle. Nothing is copied from a catalogue. Each line is drawn for a ZULLO frame, and often for one rider.

3D model of ZULLO gravel dropouts in CAD software

02 · Engineering

Our own parts, modelled in three dimensions.

Where an off-the-shelf part is not good enough, we design our own. Our dropouts are modelled in 3D down to the tenth of a millimetre — the axle interface, the brake mount, the weight saved in every cut-out — before a single piece of metal is touched.

Two ZULLO-made dropout prototypes held in the workshop

03 · Prototype

From the screen to the hand.

The drawings become real parts. Our dropouts are made and printed by ZULLO, then checked, fitted and judged in the workshop. A part has to feel right in the hand as well as look right on the screen. If it doesn't, it goes back to the drawing and we try again.

Computer airflow simulation of a ZULLO steel frame

04 · Simulation

Steel, studied in the wind.

Steel is our material, but modern tools help us get more from it. We run airflow simulations on our frames to see how air moves around the tubes and the rider, so we can make informed choices about shape and profile. Old-world craft, guided by new-world data.

Roberto TIG-welding a frame at the ZULLO workshop

05 · Build

Made by hand, in Castelnuovo.

However advanced the tools, the frame is still built by hand. Roberto TIG-welds every joint at our workshop in Castelnuovo del Garda, where every ZULLO has been made. No part of the build is sent elsewhere — design, prototype and frame all happen under the same roof.

06 · Ride

Then we ride it.

The final test is never on a screen. Roberto and the team ride the newest ideas on the roads and gravel around Lake Garda, bring back what they learn, and refine again. The innovations that pass that test find their way into the frame we build for you.

Begin a commission