commissioning_body.html 100%

Made-to-measure · Castelnuovo del Garda

Commission a ZULLO.

A guided conversation with the atelier. Tell us how you ride, how your body measures, which frame speaks to you, and the finish you'd like. Tiziano, Roberto and Francesca will personally review your specification.

Step 1 of 6

Who you are, and how you ride.

A short conversation to begin. Everything below is private and stays with the atelier.

Your name *

Email *

Phone (optional)

Country *

Your riding position

Racing

Aggressive, low over the bars.

Endurance

Slightly raised, long-day friendly.

Standard

Balanced road position.

Comfort

Upright, kinder on the back.

No default — please pick the one closest to how you ride. If you're unsure, leave blank and we'll discuss.

How you descend

Aggressive

Full speed, in the drops, committed.

Confident

Flowing lines, comfortable at pace.

Standard

Controlled, enjoys a good descent.

Cautious

Relaxed, prefers predictable handling.

Any physical conditions we should know about

Fit preferences from past bicycles

Step 2 of 6

Your measurements.

Six measurements make a frame fit. Take them with a friend. If any are tricky, tell us and we'll help.

Height

Enter once in cm or mm; we store both.

Weight (kg)

EU shoe size

The six measurements — in millimetres

B · Body length (mm)

Standing straight, barefoot — from the floor to the small notch at the top of the breastbone.

C · Inseam (mm)

Barefoot, feet 15cm apart. Press a hardcover book firmly into the crotch; measure from floor to top edge of the book.

D · Upper leg (mm)

Seated with the thigh vertical and knee bent at 90° — knee to crotch.

E · Arm length (mm)

Arm straight at your side — from the point of the shoulder to the middle knuckle of the middle finger.

F · Shoulder width (mm)

Across the back — from one shoulder point to the other.

Need help?

I'd like the atelier to walk me through measurements before I submit.

A note on your measurements

Step 3 of 6

Your geometry.

Pick the frame that speaks to you. The atelier draws every ZULLO to the rider; the geometry you see is a reference until Tiziano and Roberto review your measurements.

Choose a model

Undecided

Let's discuss

Vergine

The climber · Steel

Panta Rei

The passista · Steel

Inqubo

All-round · Steel

Tour '91

Heritage · Steel

Tonica

Track · Steel

Gravel XCR

Gravel · Stainless XCR

Geometry status: No approved per-model geometry data has been loaded yet. The geometry view in the preview panel shows a schematic diagram with pending dimensions. Your personalised numbers will be proposed by the ZULLO atelier after reviewing your measurements.

Step 4 of 6

Your build.

Frameset or complete bicycle. Then the choices that make the bicycle yours.

Build type

Frameset

The bicycle frame and your selected fork.

Add your own components later

Complete bicycle

Everything — frame, fork, groupset, cockpit, wheels, saddle.

Delivered ride-ready

Not sure? Pick either — we can switch to a "discuss with atelier" path at review.

Frame details

Fork

All models support the Columbus fork. ENVE is preferred for Gravel XCR.

Headset

Seat clamp

Cable routing

Brakes & tyres

Brake system

Brake choice affects frame, fork and tyre clearance — we'll flag any conflicts.

Tyre size (mm)

Tyres wider than 28 mm aren't compatible with rim brakes on most models — the atelier will confirm clearance.

Cockpit & drivetrain

Handlebar width (cm)

Stem length (mm)

Crank length (mm)

Gear ratios

Saddle-to-bar drop (mm)

Sign convention: positive = handlebars above saddle; negative = handlebars below saddle. Example: -80 means bars 80mm below saddle.

Step 5 of 6

Your finish.

Five approved colours, matte or gloss, standard graphics or a custom consultation. Digital swatches are approximate — the real paint is prepared by hand.

Colour

Rosso Rubino

RAL 3003

Blu Zaffiro

RAL 5003

Verde Bosco

RAL 6009

Crema

RAL 9001

Nero

RAL 9005

Grigio Pietra

Demo · TBC

Argento

Demo · TBC

Avorio

Demo · TBC

Rosa Antico

Demo · TBC

Verde Salvia

Demo · TBC

Blu Notte

Demo · TBC

Celeste

Demo · TBC

Giallo Senape

Demo · TBC

Arancio

Demo · TBC

Terra di Siena

Demo · TBC

Viola

Demo · TBC

Verde Oliva

Demo · TBC

Marrone

Demo · TBC

Bronzo

Demo · TBC

Bianco

Demo · TBC

Bespoke graphics

Create your own ZULLO

Note: Screen colours are indicative only. The final paint specification is confirmed in writing with the ZULLO atelier. Demo swatches are placeholder options awaiting formal approval.

Finish

Matte

Soft, hand-applied, subtle texture.

Glossy

Deep, high-shine, lacquered.

Logo colour

Cream

Navy

White

Black

Gold

Pick the ZULLO wordmark colour that sits on the down tube.

Fork colour

Matching fork

Fork painted in the same colour as the frame.

Included

Contrasting fork

A different paint colour on the fork.

+ €80

Graphics

Standard graphics

The ZULLO wordmark and Est. 1973 mark, placed in the atelier's usual way.

Custom graphics

Consultation with a ZULLO designer. Pricing and timing agreed with the atelier.

Finish notes & special requests (optional)

Treated as a consultation request — not a standard offering.

Step 6 of 6

Review and send.

A last look. Edit any line, add anything we've missed, and send it to Castelnuovo del Garda.

Target delivery timing (optional)

Lead times are confirmed with the atelier after review.

Anything else to tell the atelier?

Required: I understand this is a specification submitted for atelier review — not an automatically approved production order. Prices, lead times, compatibility and final geometry are confirmed by ZULLO in writing before production begins.

Optional: I'd like to hear from ZULLO about the atelier, events, and L'Officina.

Colour and finish preview. Final specification confirmed with the ZULLO atelier.

Build summary

Grazie

Your commission is with the atelier.

Tiziano, Roberto and Francesca will personally review your specification and reply from Castelnuovo del Garda. You'll receive a written proposal covering geometry, components, finish, lead time and pricing before anything is confirmed.

Read about L’Officina →

Dimension	Value
Effective top tube	pending atelier proposal
Seat tube (C-T)	pending
Head tube	pending
Stack / Reach	pending
Seat / Head angle	pending
Chainstay / Wheelbase	pending
Bottom bracket drop	pending
Fork offset	pending

Commission a ZULLO.

Who you are, and how you ride.

Your measurements.

The six measurements — in millimetres

Your geometry.

Your build.

Frame details

Brakes & tyres

Cockpit & drivetrain

Your finish.

Create your own ZULLO.

Review and send.

Your commission is with the atelier.